Warzone TPM 2.0 Error: How to Fix Failed Attestation on PC
Warzone on PC blocks online modes until TPM 2.0 passes the Call of Duty attestation check. Confirm your TPM status in tpm.msc, enable Intel PTT or AMD fTPM in your BIOS and scan again with the Secure Attestation Wizard. Restart your PC and queue for a match.
By Neeraj Singh ~7 min Updated Nov 2026 Checked against Activision Support and Microsoft Support
Warzone requires TPM 2.0 and Secure Boot on PC, according to Activision Support. Press Windows key + R, enter tpm.msc and look for The TPM is ready for use. Enable Intel PTT or AMD CPU fTPM in your BIOS if the TPM is off. Download the Secure Attestation Wizard from Activision and scan your PC to see which setting still fails. Approve the CODBrokerInstaller.exe and enrollaik.exe prompts with Yes.
What the Warzone TPM 2.0 Error Means
Activision Support says both TPM 2.0 and Secure Boot are required to play Warzone. Players who miss either one lose access to online game modes.
Players who fail the check see a Failed Attestation Status. The Secure Attestation Wizard names the failing setting, for example TPM 2.0: Not Enabled.
Activision lists Windows 10 version 22H2 or later and any Windows 11 version. TPM 2.0 comes from an Intel 8th Gen or newer CPU, an AMD Ryzen 2000 series or newer CPU or a discrete TPM chip.
Secure Boot has its own FileFix page. This page covers the TPM message and the wizard.
Why Warzone Reports TPM 2.0 as Not Compliant
TPM 2.0 is switched off in your BIOS or UEFI firmware.
Your CPU lacks TPM support and your board has no discrete TPM chip.
The Secure Attestation Wizard could not scan because a Windows prompt was declined.
Your TPM firmware version sits on the list Activision marks for an update.
Missing Windows updates make the scan report TCG Event Log Failed.
Expert insight
“Warzone blocks online modes when TPM 2.0 fails the attestation check. I scan with the Secure Attestation Wizard first because it names the setting that fails. Then I check tpm.msc for The TPM is ready for use. If it is off I enable Intel PTT or AMD fTPM in the BIOS and approve every Windows prompt with Yes.”
2Accept the terms and start the scan. Activision says a compliant result means you can delete the wizard.
3A non-compliant result lists the settings to fix. TPM 2.0: Not Enabled sends you to Method 3. Secure Boot: Not Enabled sends you to our Warzone Secure Boot error guide.
4Boot Partition not set to GPT and BIOS Boot mode not set to UEFI need a disk or boot mode change. Our MBR2GPT validation fix covers the conversion errors.
Method 2
Check TPM Status and Version in Windows
1Press Windows key + R, enter the command below and press Enter.
tpm.msc
2Activision says The TPM is ready for use means TPM 2.0 is active. Compatible TPM cannot be found means the TPM is disabled or unsupported.
3Write down the Manufacturer Version under TPM Manufacturer Information. You need it in Method 5.
1Open Settings, System and Recovery on Windows 11. Windows 10 users open Settings, Update & Security and Recovery. Select Restart now under Advanced startup.
2Select Troubleshoot, Advanced options and UEFI Firmware Settings.
3Open the Advanced, Security or Trusted Computing section. The name varies by maker. On Intel enable PTT or Security Device Support. On AMD enable AMD CPU fTPM.
4Save and exit. Activision names F10 as the usual key. Confirm the result in tpm.msc after Windows starts.
1Select Yes on the CODBrokerInstaller.exe prompt. Activision says to enter an administrator username and password. Selecting No or closing the prompt blocks play.
2Select Yes on the enrollaik.exe prompt. Selecting No blocks play here too.
3If the wizard shows Authorization Key Failed, select Generate Key and approve the enrollaik.exe prompt. If you get CODBrokerInstaller.exe authorization declined with no prompt, set User Account Control to Always notify or the default level and restart the game.
4Prompts that return after you select Yes point to firmware. Activision links AMD versions that start with 3.x.0.x to this behavior. Go to Method 5.
Method 5
Check TPM Firmware and Report Hardware That Still Fails
1Compare your Manufacturer Version from tpm.msc with Activision. AMD versions in the 3.x.0.x range need an update. Activision lists 3.92.0.5 as needing one and 3.92.5.5 as OK.
2Intel versions INTC 302.12.x.x and INTC 303.12.x.x can also need a firmware update. Install the latest BIOS for your exact board or PC model from your maker.
3If the wizard shows TCG Event Log Failed, restart and install the latest Windows updates. Our TCG Event Log Failure fix covers it in full.
4Lenovo owners who still fail should contact Lenovo support for the right BIOS. If you still see Failed Attestation Status after every step, send your status through the Activision TPM report page.
Scan again with the wizard after every method. Fix the setting it lists first and restart your PC before you test Warzone.
Frequently asked questions
What does the Warzone TPM 2.0 error mean?
Activision says both TPM 2.0 and Secure Boot are required to play Warzone on PC. A PC that fails shows a Failed Attestation Status and loses online game modes. Enable the missing setting and scan again.
Does Warzone require TPM 2.0?
Yes. Activision Support states that both TPM 2.0 and Secure Boot are required to play Warzone. Check TPM with tpm.msc and Secure Boot with msinfo32.
What is the Secure Attestation Wizard?
It is an Activision download that scans your PC for the TPM 2.0 and Secure Boot requirements. A compliant result means you can delete it. A non-compliant result lists the settings to fix.
How do I enable TPM 2.0 for Warzone?
Open your UEFI firmware settings and find the Advanced, Security or Trusted Computing section. Enable Intel PTT or Security Device Support on Intel. Enable AMD CPU fTPM on AMD.
What does TPM 2.0: Not Enabled mean in the wizard?
The wizard found TPM 2.0 switched off or missing. Enable it in your BIOS and confirm The TPM is ready for use in tpm.msc.
Why does the wizard say Authorization Key Failed?
Windows did not allow the scan. Select Generate Key and approve the enrollaik.exe prompt with Yes.
Why do I still fail attestation with TPM 2.0 enabled?
Your TPM firmware can be on the list that needs an update. Check the Manufacturer Version in tpm.msc and install the latest BIOS for your model. Activision also accepts reports at its TPM report page.
Is this the same as the RICOCHET TPM error?
Both come from the Call of Duty security check. Our RICOCHET TPM and Secure Boot page covers that message and the failed attestation page covers the status.