Categories About Us Contact Us Become a Member

Battlefield 6 TPM 2.0 Error: How to Fix the TPM 2.0 Required Warning

Battlefield 6 on PC needs TPM 2.0 switched on, and EA now warns players whose systems fail the check. Confirm your TPM status in tpm.msc, then enable Intel PTT or AMD fTPM in your BIOS. Restart and start the game again.

By Neeraj Singh ~6 min Updated Nov 2026 Checked against EA Help and Microsoft Support
Error message
Battlefield 6 TPM 2.0 compliance warning. The in-game notice sends you to the EA Help TPM 2.0 article.
Summary

Battlefield 6 requires TPM 2.0 on PC, according to EA Help. Press Windows key + R, enter tpm.msc and look for The TPM is ready for use with Specification Version 2.0. If the TPM is missing or off, enable Intel PTT or AMD fTPM in your BIOS. EA says the warning is guidance for now and TPM 2.0 compliance becomes an anticheat enforcement measure in a future update.

What the Battlefield 6 TPM 2.0 Warning Means

EA lists TPM 2.0 as a requirement for Battlefield 6 on PC. EA Javelin Anticheat uses it with other security features to protect matches.

EA Help says players need Windows 10 or 11 to use TPM 2.0. A system that fails the check now sees an in-game notice that points to EA Help.

EA says the warning is guidance and does not block play today. EA expects it to reach about 1% of active players and plans to enforce TPM 2.0 in a future update. No date is public.

Secure Boot is a separate setting with its own FileFix page. This page covers TPM only.

Why Battlefield 6 Says Your TPM Is Not Compliant

TPM is disabled in your BIOS, a common state on retail motherboards.
Your TPM reports a version below 2.0.
Your firmware starts in Legacy mode, which Microsoft says does not work as expected with TPM 2.0.
Your board or PC does not support TPM 2.0 without a firmware update.
A configuration issue that your manufacturer already fixed in a BIOS update.
Expert insight

“Battlefield 6 shows the TPM 2.0 warning when your PC fails the EA check. I open tpm.msc first and look for Specification Version 2.0. If the TPM is off I enable Intel PTT or AMD fTPM in the BIOS. Then I confirm UEFI mode and look for a BIOS update from my maker.”

✓ How to fix it

Method 1

Check Your TPM Status and Version

1Press Windows key + R, enter the command below and select OK.
tpm.msc
2Look for the status The TPM is ready for use. Check that Specification Version reads 2.0. EA Help uses the same two checks.
3Microsoft places the version under TPM Manufacturer Information. A version below 2.0 fails the Windows 11 requirement.
4Seeing "Compatible TPM cannot be found"? Microsoft says the TPM can be disabled in your firmware. Go to Method 2.
5Prefer a second route? Open Windows Security, then Device security. No Security processor section points to a disabled TPM. Our TPM 2.0 check guide covers more ways to confirm it.
Method 2

Enable TPM 2.0 in Your BIOS

1Back up your files and keep your BitLocker recovery key ready before you change firmware settings. Our BitLocker recovery key guide shows where to find it.
2Search for Change Advanced Startup Options from the Windows key. Next to Advanced startup, select Restart now. Then select Advanced options and UEFI Firmware Settings.
3Look for a TPM setting. EA names TPM, Trusted Platform Module, Intel Platform Trust Technology (PTT) and AMD fTPM. Microsoft adds that it sits in a sub-menu labeled Advanced, Security or Trusted Computing.
4Enable it, save your changes and restart. Menus differ by maker. Our guide to enable TPM 2.0 with fTPM or PTT lists the names by brand.
5Enter tpm.msc again and confirm the version. Official steps sit in the EA Help TPM 2.0 article and the Microsoft guide to enable TPM 2.0.
Method 3

Confirm Your PC Starts in UEFI Mode

1Microsoft says TPM 2.0 requires UEFI firmware. A device with legacy BIOS and TPM 2.0 does not work as expected. Read the details on the Microsoft TPM overview.
2Press Windows key + R, enter msinfo32 and read BIOS Mode in System Summary. You need UEFI.
3Legacy mode needs a disk conversion and a firmware change. Follow our UEFI or Legacy BIOS check first. Then use the MBR2GPT validation fix if the conversion tool fails.
Method 4

Check Whether Your Board Supports TPM 2.0

1EA Help says your PC must support TPM 2.0. If it does not, check your PC or motherboard maker site for support information or a firmware update.
2Find your exact board or PC model. Open the maker support page and search for a TPM 2.0 setting or a newer BIOS.
3Update the BIOS if the maker lists a newer version. Our BIOS update guide covers the safe order of steps.
4EA says some configuration issues were already fixed by manufacturer updates. A BIOS update from your maker is worth checking before you change hardware.
Method 5

Fix the Warning When tpm.msc Shows Ready

1Confirm tpm.msc shows a ready TPM with Specification Version 2.0 and msinfo32 shows BIOS Mode as UEFI.
2Restart your PC fully and start Battlefield 6 again. Read the EA BFComms post on the TPM 2.0 warning for what EA says about the notice.
3Check Secure Boot next. EA lists it with TPM 2.0 among the PC security features. Our Battlefield 6 system requirements page lists the full set.
4Still blocked? Tell us your TPM version and BIOS mode through the submit error form.

Battlefield 6 on PC needs TPM 2.0 enabled and a UEFI firmware mode. Check tpm.msc for Specification Version 2.0 and enable Intel PTT or AMD fTPM in your BIOS if the TPM is off.

Frequently asked questions

Does Battlefield 6 require TPM 2.0?
Yes on PC. EA Help says you need TPM 2.0 enabled to play Battlefield 6. Check your status in tpm.msc.
Does the Battlefield 6 TPM 2.0 warning block me from playing?
Not today. EA says the warning is guidance and does not block play. EA plans to enforce TPM 2.0 compliance in a future update and says it will share more information first.
How do I check TPM 2.0 for Battlefield 6?
Press Windows key + R, enter tpm.msc and select OK. You need the status The TPM is ready for use with Specification Version 2.0.
How do I enable TPM 2.0 on my PC?
Open UEFI Firmware Settings from Advanced startup and look for TPM, Trusted Platform Module, Intel PTT or AMD fTPM. Enable it, save and restart. Menu names differ by maker.
What does Compatible TPM cannot be found mean in tpm.msc?
Microsoft says the TPM can be disabled. Enable it in your BIOS and check tpm.msc again.
Does Windows 10 work for Battlefield 6 TPM 2.0?
EA Help says you need Windows 10 or 11 to use TPM 2.0. Check that your TPM reports version 2.0 in tpm.msc.
What if my motherboard does not support TPM 2.0?
EA Help says to check your PC or motherboard maker site for TPM 2.0 support or a firmware update. A BIOS update from the maker can add or fix the setting.
Is TPM 2.0 the same as Secure Boot?
No. They are separate settings and EA lists both as Battlefield 6 PC security features. Use the Secure Boot guide on FileFix for that setting.

Still not working?

Check your Secure Boot state with the Battlefield 6 Secure Boot fix and read the EA AntiCheat Secure Boot guide. Other launch errors sit in the EA AntiCheat error guide. Send us your error if yours is not covered.

Was this fix helpful? Thanks for your feedback!