Categories About Us Contact Us Become a Member

How to Check If Your PC Uses UEFI or Legacy BIOS

Press Windows key + R, type msinfo32 and read BIOS Mode in System Summary. UEFI means your PC starts Windows in UEFI mode and Legacy means legacy BIOS. Disk Management and diskpart confirm the answer through your GPT or MBR disk.

By Neeraj Singh ~4 min Updated Nov 2026 Checked against Microsoft Learn and EA Help
Error message
BIOS Mode: Legacy
Summary

BIOS Mode in msinfo32 reads UEFI or Legacy. Microsoft pairs UEFI mode with a GPT disk and BIOS mode with an MBR disk. Microsoft also says Secure Boot can only be enabled with UEFI. EA Help lists a UEFI BIOS and a GPT Windows disk as steps for Secure Boot. Check BIOS Mode first and confirm your disk style second.

What UEFI and Legacy BIOS Mean on Your PC

UEFI and legacy BIOS are two firmware modes your PC uses to start Windows. Microsoft describes UEFI as a modern version of the PC BIOS.

Windows keeps the mode you installed it with. Microsoft says the device boots automatically using the same mode it was installed with.

Your disk style has to match that mode. Microsoft uses the GPT format for UEFI mode and the MBR format for BIOS mode.

Game anticheat setup guides start with this check. Secure Boot needs UEFI and the EA Secure Boot steps start from UEFI and GPT.

Why Your PC Shows Legacy Instead of UEFI

Windows was installed in legacy BIOS mode.
Your Windows disk uses MBR. Microsoft pairs MBR with BIOS mode.
Your firmware boot mode is set to Legacy and not UEFI.
You converted the disk to GPT but never switched the firmware to UEFI mode. Microsoft says the firmware must be reconfigured to boot in UEFI mode after conversion.

✓ How to fix it

Method 1

Check BIOS Mode in System Information

1Press Windows key + R, type msinfo32 and press Enter.
2Select System Summary in the left pane.
3Find BIOS Mode on the right. The value reads UEFI or Legacy.
4UEFI means your PC starts in UEFI mode. Legacy means it starts in legacy BIOS mode. Go to Method 5 if you see Legacy.
Method 2

Check Your Disk in Disk Management

1Right-click the Start button and select Disk Management. You can also press Windows key + R and enter diskmgmt.msc.
2In the bottom pane right-click the disk number of your Windows disk and select Properties.
3Open the Volumes tab and read Partition style.
4GUID Partition Table (GPT) goes with UEFI mode. Master Boot Record (MBR) goes with legacy BIOS mode.
5Microsoft lists these same steps in its Microsoft Learn MBR2GPT article.
Method 3

Check Your Disk With diskpart

1Open a Command Prompt window with administrator rights and start diskpart.
diskpart
2List your disks.
list disk
3Read the Gpt column. An asterisk means the disk is GPT. A blank means the disk is MBR.
4Type exit to close diskpart.
5Microsoft documents this output in its Microsoft Learn MBR2GPT article.
Method 4

Check Your Disk With PowerShell

1Open Windows PowerShell.
2Enter this command to list every disk with its style.
Get-Disk | ft -Auto
3Read the Partition Style column. It shows GPT or MBR for every disk number.
4Match the disk number to the disk that holds Windows. Microsoft states that Windows does not support booting UEFI from MBR disks. A UEFI boot disk therefore reads GPT.
Method 5

What to Do When BIOS Mode Shows Legacy

1Note your disk style from Method 2 or 3. Legacy with MBR is the legacy BIOS pairing.
2Make a backup of your files before you change anything about your boot disk.
3Microsoft points to the MBR2GPT tool for switching modes after install. Follow MBR2GPT validation failed if it fails validation.
4Setup shows a partition style message instead? Follow the selected disk GPT or MBR partition style error.
5Open msinfo32 again after the firmware switch and confirm BIOS Mode reads UEFI. Then check whether Secure Boot is on.

BIOS Mode in msinfo32 is your quickest answer and the disk style confirms it. Legacy with MBR and UEFI with GPT are the pairs Microsoft describes. Make a backup before any boot disk change.

Frequently asked questions

How do I check if my PC uses UEFI or legacy BIOS?
Hold the Windows key and press R. Enter msinfo32 and select System Summary. BIOS Mode reads UEFI or Legacy.
What does BIOS Mode Legacy mean?
Legacy means your PC starts Windows in legacy BIOS mode. Microsoft pairs that mode with the MBR disk format.
Can UEFI boot Windows from an MBR disk?
No. Microsoft states that Windows does not support booting UEFI from MBR disks. UEFI systems need the boot partition on a GPT disk.
Does Secure Boot need UEFI?
Yes. Microsoft says Secure Boot can only be enabled with UEFI. Check your BIOS Mode before you try to enable Secure Boot.
Do games need UEFI?
EA Help says Secure Boot needs TPM 2.0 on, a GPT Windows disk and a UEFI BIOS. Games that require Secure Boot inherit that need.
BIOS Mode says UEFI. Is Secure Boot on?
Not always. UEFI mode makes Secure Boot possible but Secure Boot State in msinfo32 must also read On.
How do I see if my disk is GPT in diskpart?
Enter list disk and read the Gpt column. An asterisk means GPT and a blank means MBR.

Still not working?

BIOS Mode still reads Legacy after your checks? Move on to how to enable Secure Boot once you read UEFI. Gamers can also compare EA AntiCheat Secure Boot or FACEIT Secure Boot. You can submit your error and we will look at your case.

Was this fix helpful? Thanks for your feedback!