How to Check If Secure Boot Is On in Windows 11 and 10
Check Secure Boot in under a minute. Open msinfo32 and read Secure Boot State, or enter Confirm-SecureBootUEFI in PowerShell, or open Device security in Windows Security. Every result below tells you what to do next for On, Off and Unsupported.
By Neeraj Singh ~4 min Updated Nov 2026 Checked against Microsoft Learn and Support
Error message
Secure Boot State: On, Off or Unsupported (System Information, msinfo32)
Summary
Secure Boot State in msinfo32 shows On, Off or Unsupported. Enter Confirm-SecureBootUEFI in an administrator PowerShell window for True or False. Open Device security in Windows Security and look for the Secure boot section. Off means your PC supports it and you can enable it. Unsupported points to Legacy BIOS mode or hardware without support. Read BIOS Mode on the same msinfo32 screen to find out which one applies.
What Secure Boot State Tells You
Secure Boot is a firmware setting that checks boot files before Windows starts. Windows 11 lists its system firmware requirement as UEFI, Secure Boot capable.
Three places report the state. All three read the same firmware value. Select the one you like.
Games with anti-cheat read the same value. Valorant, Battlefield 6, FACEIT and RICOCHET stop you when Secure Boot reads Off or Unsupported.
Why Secure Boot Shows Off or Unsupported
Secure Boot is switched off in the firmware settings, which gives State Off.
Windows starts in Legacy BIOS mode instead of UEFI, which gives State Unsupported.
CSM or Legacy Support is on in the firmware, which hides the Secure Boot option.
The PC firmware has no Secure Boot support.
You entered the PowerShell command in a window without administrator rights, which blocks the result.
✓ How to fix it
Method 1
Check Secure Boot State in System Information
1Press Windows key + R, enter this and press Enter.
msinfo32
2Select System Summary in the left pane. In the right pane find Secure Boot State.
3On means Secure Boot is active. Off means your PC supports it and it is switched off. Unsupported means Windows does not see Secure Boot support.
4Read BIOS Mode on the line above. UEFI next to Unsupported points to old firmware. Legacy next to Unsupported points to the boot mode. The UEFI or Legacy BIOS check explains the difference.
Method 2
Check Secure Boot With PowerShell
1Right-click the Start button and select Terminal (Admin) or Windows PowerShell (Admin). Microsoft says the command needs administrator mode.
2Enter this command and press Enter.
Confirm-SecureBootUEFI
3Microsoft says the cmdlet checks the Secure Boot status on a UEFI computer. True means Secure Boot is enabled. False means it is disabled.
4The message "Cmdlet not supported on this platform" means your PC uses Legacy BIOS or has no Secure Boot support. See the Confirm-SecureBootUEFI page on Microsoft Learn for the cmdlet details.
5The message "Unable to set proper privileges. Access was denied." means PowerShell opened without administrator rights. Close it and open it again as administrator.
Method 3
Check Secure Boot in Windows Security
1Select the Start button, type Windows Security and open the app.
2Select Device security. Microsoft says you can also open this page with the shortcut windowsdefender://hardware/.
3Look for the Secure boot section on the page. A Secure boot section that reads as on means Secure Boot is active.
4No Secure boot section on your Device security page points to Legacy BIOS mode or a PC without support. Check msinfo32 in Method 1 to confirm.
4Secure Boot stays Off after you switch it on? Update the firmware first. The BIOS update guide for Secure Boot lists what to check.
5The firmware menu holds the real setting. Microsoft lists the path as Settings, System, Recovery, Advanced startup, Troubleshoot, Advanced options and UEFI Firmware Settings on its Secure Boot overview page.
Method 5
Check Secure Boot Before You Launch a Game
1Open msinfo32 and confirm that Secure Boot State reads On and BIOS Mode reads UEFI. Anti-cheat checks both.
Check Secure Boot State in msinfo32 or enter Confirm-SecureBootUEFI in an administrator PowerShell window. On or True means it is active. Off or False means you can enable it. Unsupported means you need to fix the boot mode first.
Frequently asked questions
How do I check if Secure Boot is on in Windows 11?
Open msinfo32 with Windows key + R and find Secure Boot State in System Summary. On means Secure Boot is active. You can also enter Confirm-SecureBootUEFI in an administrator PowerShell window.
What does Secure Boot State Unsupported mean?
Windows does not see Secure Boot support on your PC. The common cause is Legacy BIOS mode instead of UEFI. The Secure Boot State Unsupported page on FileFix covers the fix.
What does Confirm-SecureBootUEFI return?
Microsoft says it returns True when Secure Boot is enabled and False when it is disabled. On a Legacy BIOS PC it shows the message Cmdlet not supported on this platform.
Where is Secure Boot in Windows Security?
Open Windows Security and select Device security. Secure boot appears as a section on that page. If the section is missing, your PC uses Legacy BIOS mode or lacks support.
Why does PowerShell say Access was denied?
The Confirm-SecureBootUEFI command needs administrator mode. Close PowerShell and open it again as administrator. Then enter the command again.
Do I need Secure Boot for Valorant or Battlefield 6?
Both games stop you with a Secure Boot message when the state is Off or Unsupported. Check the state first and then open the game page for your message. The FileFix game pages list the exact steps.
Can I check Secure Boot without restarting my PC?
Yes. msinfo32, PowerShell and Windows Security all read the state while Windows is open. You restart only when you change the setting in the firmware.