Black Ops 7 Secure Boot Error: How to Fix "Secure Boot Required"
Black Ops 7 on PC needs Secure Boot and TPM 2.0 switched on. Scan your PC with the Activision wizard or check both in Windows, then enable the missing setting in your BIOS. Your Failed Attestation Status clears after one restart.
By Neeraj Singh ~8 min Updated Nov 2026 Checked against Activision Support and Microsoft Learn
Error message
Failed Attestation Status. / Secure Boot: Not Enabled. / BIOS Boot mode not set to UEFI.
Summary
Black Ops 7 requires Secure Boot and TPM 2.0 on PC. Activision Support says so in its requirements. Press Win+R, enter msinfo32 and look for BIOS Mode set to UEFI and Secure Boot State set to On. Enter tpm.msc and look for "The TPM is ready for use." Your Windows disk must use GPT and your BIOS must use UEFI mode. Fix the item that fails, enable Secure Boot in your BIOS and launch the game again.
What the Black Ops 7 Secure Boot Requirement Means
Black Ops 7 checks your PC for Secure Boot and TPM 2.0 before it lets you into the full game. Activision Support states that both are required to play on PC.
Activision says players who do not meet the requirements are restricted from certain game modes (including Ranked Play) and playlists. They can land in separate matchmaking pools.
Blizzard Support adds that a launch notification tells you the system does not meet the new security standards required to play. Neither company prints one fixed error code for it.
Your PC then shows Failed Attestation Status in game. Fix the setting that fails and the status clears.
Why Black Ops 7 Reports Secure Boot as Off
Secure Boot is switched off in your BIOS.
BIOS Boot Mode reads Legacy or CSM instead of UEFI.
Your Windows disk uses MBR instead of GPT.
TPM 2.0 is disabled in your firmware.
The tpm.msc console cannot find a compatible TPM.
You declined the CODBrokerInstaller.exe or enrollaik.exe prompt.
Your AMD or Intel TPM firmware version needs a BIOS update.
Expert insight
“Failed Attestation Status in Black Ops 7 means your PC fails the Secure Boot or TPM 2.0 check. I scan with the Activision wizard first and confirm in msinfo32 by hand. Then I fix only the item that fails and enable Secure Boot in the BIOS. One restart clears the status.”
2Accept the terms and start the scan. The wizard lists what to fix. Its results include “TPM 2.0: Not Enabled”, “Secure Boot: Not Enabled”, “Boot Partition not set to GPT” and “BIOS Boot mode not set to UEFI”.
3Check by hand too. Press Win+R, enter the command below and read BIOS Mode and Secure Boot State. Activision wants UEFI and On.
msinfo32
4Off means Secure Boot is supported but disabled. Unsupported means you should check whether your board supports it. Our Secure Boot check guide explains every result.
5Delete the wizard if your PC passes. Move to the method that matches the line it flagged.
Method 2
Enable Secure Boot and UEFI Mode in Your BIOS
1Open your firmware settings. On Windows 11 select Settings, System, Recovery, Advanced startup and Restart now. Windows 10 uses Update & Security in place of System.
2Then select Troubleshoot, Advanced options and UEFI Firmware Settings.
3Open the Boot tab. Set Boot Mode from Legacy or CSM to UEFI and disable CSM if your board lists it. Activision says Advanced or Startup holds the setting on some boards.
4Set Secure Boot to Enabled. If the option is grayed out, confirm UEFI is selected, save and reopen the BIOS.
5Save and exit. Activision names F10 as the usual key. Menus differ by maker. Follow our Secure Boot enable guide for your board.
6Enter msinfo32 again and confirm Secure Boot State reads On.
Method 3
Convert MBR to GPT When the Wizard Flags Your Disk
1Make a backup of your files first. Microsoft warns that the conversion changes how your disk boots.
2Open Disk Management, right-click your Windows drive, select Properties and open the Volumes tab. Confirm Partition style reads MBR.
3Activision lists the requirements. You need Windows 10 version 1703 or later, a 64-bit system, no more than three partitions, BitLocker off, no dual boot and Secure Boot disabled before you start.
4Open Command Prompt as administrator and validate the disk. Continue only if validation succeeds.
mbr2gpt /validate /allowFullOS
5Convert the disk.
mbr2gpt /convert /allowFullOS
6Restart into the BIOS, switch Boot Mode from Legacy to UEFI and start Windows. Then enable Secure Boot with Method 2. Microsoft documents the tool on its Microsoft MBR2GPT page. Our MBR2GPT validation fix covers failed validation.
Method 4
Enable TPM 2.0 in Your BIOS
1Press Win+R, enter the command below and press Enter. Look for “The TPM is ready for use” under Status.
tpm.msc
2The message “Compatible TPM cannot be found” means the TPM is disabled in the BIOS or your system does not support it.
3Open your firmware settings as in Method 2. Select the Advanced, Security or Trusted Computing tab, depending on your board.
4Enable Intel PTT or Security Device Support on Intel. Enable AMD CPU fTPM on AMD. Activision lists Intel 8th Gen or newer and AMD Ryzen 2000 series or newer as supported.
5Save, exit and check tpm.msc again. Our TPM 2.0 enable guide shows the menu names by brand.
Method 5
Fix Prompts and Firmware Versions That Still Block You
1Select Yes on the CODBrokerInstaller.exe prompt at first launch and enter your administrator name and password. Activision says selecting No or closing the prompt blocks play. Select Yes on enrollaik.exe too if it appears.
2If you see “CODBrokerInstaller.exe authorization declined” with no prompt, search the Start menu for Change user account control settings. Set the slider to Always notify or the default level below it. Select OK and restart the game.
3If the wizard says “Authorization Key Failed”, select Generate Key and then Yes. For “TCG Event Log Failed”, restart your PC and install the latest Windows update. Our TCG Event Log failure fix covers it.
4Check TPM Manufacturer Information in tpm.msc. Activision says AMD versions that start with 3 and end in .0.* need a firmware update. Intel versions INTC 302.12.*.* or INTC 303.12.*.* can need one too.
5Update your BIOS from your motherboard maker, then recheck every setting. Our BIOS update guide covers the order.
Open the wizard or msinfo32 after every method and confirm the flagged line is gone. Activision lists a report page for players who finish every step and still see Failed Attestation Status.
Frequently asked questions
Does Black Ops 7 require Secure Boot on PC?
Yes. Activision Support says TPM 2.0 and Secure Boot are required to play Black Ops 7 on PC. Check both with msinfo32 and tpm.msc.
What is the Black Ops 7 Secure Boot error message?
Activision does not publish one fixed launch message. Blizzard Support says a notification tells you the system does not meet the new security standards required to play. The in-game status reads Failed Attestation Status.
Can I still play Black Ops 7 without Secure Boot?
Activision says players who do not meet the requirements are restricted from certain game modes (including Ranked Play) and can be placed in separate matchmaking pools. Enable Secure Boot and TPM 2.0 to get full access.
How do I check Secure Boot for Black Ops 7?
Press Win+R, enter msinfo32 and read BIOS Mode and Secure Boot State. You need UEFI and On. Activision also offers a Secure Attestation Wizard that scans your PC.
Do I need GPT and UEFI for Black Ops 7?
Yes. Activision lists UEFI Boot Mode and a GPT Windows disk as part of the Secure Boot requirement. Convert an MBR disk with MBR2GPT and switch Legacy to UEFI in your BIOS.
Which Windows version does Black Ops 7 need for Secure Boot?
Activision lists Windows 10 version 22H2 or later or any version of Windows 11. It also names a TPM 2.0 chip through Intel PTT or AMD CPU fTPM on supported processors.
Why does Black Ops 7 ask for CODBrokerInstaller.exe?
Activision says CODBrokerInstaller.exe is the default prompt on first launch. Enter an administrator password and select Yes. Selecting No or closing the prompt blocks play.
What if Failed Attestation Status stays after every step?
Update your BIOS and recheck TPM Manufacturer Information in tpm.msc. Activision links a report page for players who finish its FAQ and still fail. Lenovo owners are told to contact Lenovo support for the correct firmware.