Categories About Us Contact Us Become a Member

Windows Test Mode Watermark: How to Disable It With bcdedit

Open Command Prompt as administrator, type bcdedit /set testsigning off and restart your PC. Your Test Mode watermark in the lower right corner of the desktop goes away after the restart. Windows can block the command with a Secure Boot message, so Method 3 covers that case.

By Neeraj Singh ~5 min Updated Nov 2026 Checked against Microsoft Learn, Dell, Riot and BattlEye
Error message
Test Mode
Summary

Test Mode means test signing is on and Windows loads test signed kernel mode code. Open Command Prompt as administrator and enter the bcdedit /set testsigning off command. Restart the PC because Microsoft says a change takes effect only after a restart. Your Secure Boot policy message means you must switch Secure Boot off in firmware first. Anti-cheat software like BattlEye rejects Windows in test signing mode. Disable it before you play.

What the Test Mode Watermark Means

Test Mode is a label Windows adds when test signing is on. Microsoft says Windows displays a watermark with the text Test Mode in the lower right corner of the desktop to remind you that the system has test signing enabled.

Test signing lets Windows load test signed kernel mode drivers. Microsoft says this option is not set by default.

Developers use test signing while they build and test drivers. A driver or tool you installed can leave it on.

BattlEye states on its FAQ that it cannot support systems in test signing mode in any way. Disable test signing before you launch a game that uses it.

Why Windows Shows Test Mode

You or a program entered the bcdedit /set testsigning on command to load a test signed driver.
A driver or tool installer switched test signing on in the background.
Secure Boot was off when the command was entered, which let the change go through.
The watermark stays after you disable test signing because a second boot option, like nointegritychecks, is still set.

✓ How to fix it

Method 1

Open Command Prompt as Administrator

1Select Start and type cmd. Right click Command Prompt and select Run as administrator. Select Yes on the User Account Control prompt.
2Administrator rights are required. The Microsoft Learn testsigning page says you need administrator rights and an elevated command prompt to use BCDEdit.
3You can also press Windows + X and select Command Prompt (Admin) or Terminal (Admin) if your menu shows it. The Dell support article on the Test Mode watermark lists the same route.
4Keep the window open for the next method.
Method 2

Disable Test Signing With bcdedit

1Type the command below and press Enter. The Microsoft Learn testsigning page lists TESTSIGNING OFF as the command that disables test signing.
bcdedit /set testsigning off
2Wait for the success message.
3The Microsoft Learn BCDEdit /set page warns that changing some boot options can make a PC inoperable. Type the command exactly as shown and change nothing else.
4If BitLocker is on, read the BitLocker note in Method 3 before you continue.
Method 3

Fix the Secure Boot Policy Message

1Look for the message The value is protected by Secure Boot policy and cannot be modified or deleted. The Microsoft Learn testsigning page shows this message for the testsigning command.
2Microsoft says to restart the PC, open BIOS settings and disable Secure Boot. Our check if Secure Boot is on guide shows how to read the current state first.
3Dell gives the same fix in its Dell support article on the Test Mode watermark. Disable Secure Boot, boot into Windows and enter the command again.
4BitLocker can react to these changes. The Microsoft Learn BitLocker FAQ lists changes to boot configuration settings and to BIOS or UEFI firmware as causes for the recovery screen. The Microsoft Learn BCDEdit /set page says to disable or suspend BitLocker and Secure Boot before you set BCDEdit options when the PC needs it. Find your recovery key first.
5After the command works, open firmware setup again and set Secure Boot back to Enabled. Follow our enable Secure Boot guide if you need the steps.
Method 4

Restart Windows and Check the Desktop

1Save your work and restart the PC. Microsoft says you must restart after you change the option for it to take effect, whether you enable or disable it.
2Look at the lower right corner of the desktop after sign in. The Test Mode label is gone when test signing is off.
3Install any driver that needs a signature from the vendor site. The BattlEye FAQ on Epic support pages tells players to check the vendor website for newer drivers if their hardware needs driver signature enforcement off.
Method 5

Clear Leftover Boot Options When the Watermark Stays

1Open an administrator Command Prompt. The Dell support article on the Test Mode watermark lists this extra command for a watermark that stays after the first attempt.
bcdedit /set loadoptions ENABLE_INTEGRITY_CHECKS
2Enter the testsigning command from Method 2 again.
bcdedit /set testsigning off
3Riot Games support also lists a second command for its restore steps.
bcdedit /set nointegritychecks off
4The Microsoft Learn BCDEdit /set page says nointegritychecks cannot be set when Secure Boot is on. Riot says you can skip that command if Windows shows the Secure Boot policy message.
5Restart the PC and look at the desktop again. See the Riot Games support page for its full steps.
Method 6

Open the Game Message Page

1Start your game once Test Mode is gone. If the game still shows an error, read the page for its anti-cheat.
2FACEIT players with the DEP or test signing message read the FACEIT DEP and test signing message page. BattlEye players read the BattlEye test signing message page.
3Those pages cover the game side. This page covers the Windows setting.
4Send us the exact words of the game message if no page matches.

Test Mode means test signing is on. Enter bcdedit /set testsigning off in an administrator Command Prompt and restart. Switch Secure Boot off first if Windows shows the Secure Boot policy message and enable it again after. BattlEye needs test signing off.

Frequently asked questions

How do I remove the Test Mode watermark in Windows 11?
Open Command Prompt as administrator, type bcdedit /set testsigning off and restart the PC. The label disappears after the restart. The steps match Windows 10.
What does bcdedit /set testsigning off do?
The command stops Windows from loading test signed kernel mode drivers. Microsoft says a restart is required for the change to take effect. The Test Mode label leaves the desktop after that restart.
Why does Windows say the value is protected by Secure Boot policy?
Secure Boot blocks changes to the testsigning option. Microsoft says to disable Secure Boot in BIOS settings and then try again. Set Secure Boot back to Enabled afterward.
Do I need Secure Boot off to enable test mode?
Yes on a PC with Secure Boot enabled. Microsoft shows the Secure Boot policy message for the enable command and says to disable Secure Boot first. BattlEye does not support test signing mode at all.
Why do anti-cheats like BattlEye reject test signing?
BattlEye states that it cannot support systems in test signing mode in any way. It says it prioritizes the strongest protection it can provide. Disable test signing before you play.
Will disabling test signing break my drivers?
Test signed drivers stop loading after the restart. Get a signed version from the hardware vendor if a device stops working.
Could BitLocker ask for a recovery key?
Yes. Microsoft says changes to boot configuration settings or BIOS and UEFI firmware can start the recovery screen. Find your recovery key before you change Secure Boot or boot options.
Is the Test Mode label a virus?
No. Microsoft describes it as a reminder that test signing is on. Check which driver or tool switched it on. Remove that source if you do not trust it.

Still not working?

If the game message stays after Test Mode is gone, read the FACEIT DEP and test signing message or the BattlEye test signing message. Check the firmware side with how to check if Secure Boot is on. A BitLocker prompt after a firmware change is covered in E_FVE_SECUREBOOT_DISABLED. Need more help? Tell us the exact words on your screen and the steps you tried so we can add the missing fix.

Was this fix helpful? Thanks for your feedback!